XGN15A-12SF6 box type fixed metal enclosed switchgear

XGN15A-12 box type fixed metal enclosed high-voltage switchgear (hereinafter referred to as ring network cabinet) uses sulfur hexafluoride load switch and load switch fuse combination as the whole frame of the main switch cabinet, and adopts air insulation. It is suitable for distribution automation, compact and expandable complete power distribution device. It can be widely used in the construction and transformation of urban power grids, industrial and mining enterprises, high-rise buildings, residential communities, hospitals, schools The distribution system of parks, etc., is used to receive and distribute electric energy, mainly for ring network power supply and terminal power supply. It is also suitable to be installed in portable substations.

Keyword：

Box type Metal Switchgear

Classify：

Inquiry：

Product introduction

◆ Product overview

◆ Environmental conditions for normal use

1. Ambient temperature: maximum temperature:+40 ℃; Minimum temperature: - 15 ℃; Daily average value: ≤ 35 ℃

2. Ambient humidity:

Daily average relative humidity: ≤ 95%; Monthly average relative humidity: ≤ 90%;

Daily average vapor pressure: ≤ 2.2x 10-3Mpa; Monthly average steam pressure: ≤ 1.8x10-3Mpa;

3. Altitude: no more than 1000m;

4. The seismic intensity shall not exceed 8 degrees;

5. The use site shall be free of dripping water, flammable and explosive hazards, chemical corrosive gases and violent vibration.

Note: If you have special requirements, please contact our company!

Related Products

YBW series high/low voltage prefabricated substation (European type substation)

YBW-12 series prefabricated substations are characterized by strong completeness, small size, compact structure, safe and reliable operation, convenient maintenance, and mobility.

ZB series combined substation (American type substation)

ZB series American box transformer is a new type of power distribution equipment, which is used to install transformers, high-voltage load switches and high-voltage current limiting fuses in the transformer tank for insulation and cooling with mineral oil. The utility model has the advantages of reasonable and compact structure, small volume, flexible installation, convenient operation, small floor area, etc.

ZW7-40.5 outdoor high-voltage vacuum circuit breaker

ZW7-40.5 series outdoor high-voltage vacuum circuit breaker is three-phase AC 50Hz outdoor high-voltage electrical equipment; It is applicable to the control and protection of 20~40.5kV power transmission and distribution system; It can also be used for connecting circuit breakers and opening and closing capacitor banks; This product, together with the recloser, can realize the intelligent sectional reclosing control of the power system. The current transformer can be attached for measurement and protection.

ZW8-12 Outdoor Intelligent High Voltage Pole mounted Circuit Breaker

ZW8-12 series outdoor high-voltage vacuum circuit breaker is a high-voltage outdoor switchgear with rated voltage of 12KV and three-phase AC 50Hz, which is mainly used to break and close the load current, overload current and short circuit current of rural power grid, urban power grid and small power system. The overall structure of the product is three-phase box type. The three-phase vacuum arc extinguishing chamber is placed in a metal box. The SMC insulation material is used for phase to phase insulation and ground insulation. The product has reliable performance and high insulation strength. It is a new generation of oil-free products for urban and rural power grids.

ZW20-12 Outdoor High Voltage Pole mounted Circuit Breaker

When there is a fault in the T-connected branch line of 10KV overhead distribution line or the end user, the outgoing switch of the substation will trip because the protection action time limit of the incoming switch cannot be reasonably adjusted in coordination with the protection time limit of the outgoing switch of the substation. If the fault is permanent and the substation reclosing will not be successful, a local accident within the medium voltage user boundary will cause the power failure of the entire 10KV distribution line.

FZW28-12 Outdoor High Voltage Pole mounted Circuit Breaker

FZW28-12 outdoor boundary vacuum load switch is used in column installation, with manual and electric operation functions. The switch body adopts VSP5-12 imported from Toshiba, Japan. The switch is a maintenance free load switch. Vacuum arc extinguishing and SF6 gas are used as insulation medium to ground and between phases. It is applicable to substations, industrial and mining enterprises, urban and rural power grids as protection cities, rural power grid automation distribution networks and places with frequent operations.

Obtain product quotation

Submit

Chongqing Lizhi Electric Co., Ltd

ADD：No. 1017, B1, Kewei Building, No. 2, Baihe Village, Shixin Road, Jiulongpo District, Chongqing
TEL：15111837952
E_MAIL：357146871@qq.com

Mobile website